Product details
The ball mill is a key equipment for further grinding after the material is broken, and it is used for dry or wet grinding of various ores and other grindable materials.
Â
Â
The main part of the ball mill, the "cylinder," is installed on one or two large bearings. The selected equipment varies according to different grinding conditions. Some ball mills are single-chamber ball mills, while others are two-chamber or multi-chamber ball mills, but their basic working principles are the same. The material enters the cylinder through the feeding hopper of the ball mill and is ground by grinding media of a certain shape and size inside the cylinder. When the ball mill rotates, the grinding media adhere to the lining plate surface of the cylinder under the action of centrifugal force and friction force with the lining plate surface, rotate with the cylinder, and are lifted to a certain height. Under the action of gravity, they fall freely and impact the bottom material like projectiles, crushing the material. The cycle of rising and falling of the grinding media is repeated. In addition, during the rotation of the ball mill, the media inside the cylinder will also slide and roll, so that the grinding media, lining plate, and material will be ground, achieving fine grinding. As the material is continuously fed, there is a material surface difference between the material at the feeding end and the material at the discharging end, which forces the material to flow. Moreover, when the grinding media fall and impact the material, axial thrust is generated, which also forces the material to flow. At the same time, the airflow inside the ball mill also helps the material to flow until it reaches the discharge port, completing the grinding operation.
Â
Specifications |
Cylinder speed |
Loading capacity |
Feed particle size (mm) |
Discharge granularity size (mm) |
Output (t/h) |
Motor Power |
Total weight (t) |
Ф900×1800 |
36-38 |
1.5 |
<20 |
0.075-0.89 |
0.65-2 |
18.5 |
5.85 |
Ф900×3000 |
36 |
2.7 |
<20 |
0.075-0.89 |
1.1-3.5 |
22 |
6.98 |
Ф1200×2400 |
36 |
3 |
<25 |
0.075-0.6 |
1.5-4.8 |
30 |
13.6 |
Ф1200×3000 |
36 |
3.5 |
<25 |
0.074-0.4 |
1.6-5 |
37 |
14.3 |
Ф1200×4500 |
32.4 |
5 |
<25 |
0.074-0.4 |
1.6-5.8 |
55 |
15.6 |
Ф1500×3000 |
29.7 |
7.5 |
<25 |
0.074-0.4 |
2-5 |
75 |
19.5 |
Ф1500×4500 |
27 |
11 |
<25 |
0.074-0.4 |
3-6 |
110 |
22 |
Ф1500×5700 |
28 |
12 |
<25 |
0.074-0.4 |
3.5-6 |
130 |
25.8 |
Ф1830×3000 |
25.4 |
11 |
<25 |
0.074-0.4 |
4-10 |
130 |
34.5 |
Ф1830×4500 |
25.4 |
15 |
<25 |
0.074-0.4 |
4.5-12 |
155 |
38 |
Ф1830×6400 |
24.1 |
21 |
<25 |
0.074-0.4 |
6.5-15 |
210 |
43 |
Ф1830×7000 |
24.1 |
23 |
<25 |
0.074-0.4 |
7.5-17 |
245 |
43.8 |
Ф2100×3000 |
23.7 |
15 |
<25 |
0.074-0.4 |
6.5-36 |
155 |
45 |
Ф2100×4500 |
23.7 |
24 |
<25 |
0.074-0.4 |
8-43 |
245 |
56 |
Ф2100×7000 |
23.7 |
26 |
<25 |
0.074-0.4 |
12-48 |
280 |
59.5 |
Ф2200×4500 |
21.5 |
27 |
<25 |
0.074-0.4 |
9-45 |
280 |
54.5 |
Ф2200×6500 |
21.7 |
35 |
<25 |
0.074-0.4 |
14-26 |
380 |
61 |
Ф2200×7000 |
21.7 |
35 |
<25 |
0.074-0.4 |
15-28 |
380 |
62.5 |
Ф2200×7500 |
21.7 |
35 |
<25 |
0.074-0.4 |
15-30 |
380 |
64.8 |
Ф2400×3000 |
21 |
23 |
<25 |
0.074-0.4 |
7-50 |
245 |
58 |
Ф2400×4500 |
21 |
30 |
<25 |
0.074-0.4 |
8.5-60 |
320 |
72 |
Ф2700×4000 |
20.7 |
40 |
<25 |
0.074-0.4 |
22-80 |
380 |
95 |
Ф2700×4500 |
20.7 |
48 |
<25 |
0.074-0.4 |
26-90 |
480 |
102 |
Ф3200×4500 |
18 |
65 |
<25 |
0.074-0.4 |
According to process conditions |
630 |
149 |
Ф3600×4500 |
17 |
90 |
<25 |
0.074-0.4 |
According to process conditions |
850 |
169 |
Ф3600×6000 |
17 |
110 |
<25 |
0.074-0.4 |
According to process conditions |
1250 |
198 |
Ф3600×8500 |
18 |
131 |
<25 |
0.074-0.4 |
45.8-256 |
1800 |
260 |
Ф4000×5000 |
16.9 |
121 |
<25 |
0.074-0.4 |
45-208 |
1500 |
230 |
Ф4000×6000 |
16.9 |
146 |
<25 |
0.074-0.4 |
65-248 |
1600 |
242 |
Ф4000×6700 |
16.9 |
149 |
<25 |
0.074-0.4 |
75-252 |
1800 |
249 |
Ф4500×6400 |
15.6 |
172 |
<25 |
0.074-0.4 |
84-306 |
2000 |
280 |
Ф5030×6400 |
14.4 |
216 |
<25 |
0.074-0.4 |
98-386 |
2500 |
320 |
Ф5030×8300 |
14.4 |
266 |
<25 |
0.074-0.4 |
118-500 |
3300 |
403 |
Ф5500×8500 |
13.8 |
338 |
<25 |
0.074-0.4 |
148-615 |
4500 |
525 |
Â
Ball mill machine is widely used in cement, silicate products, new building materials, refractory materials, fertilizers, ferrous and non-ferrous metal beneficiation, glass ceramics and other production industries,
Â
Ball mill machine is widely used in the production industries of cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metal beneficiation, as well as glass ceramics, etc.
Â
http://www.herunmachine.com/